Guardinest Montessori Floor Bed 120x190cm

What’s Included

• Floor Bed frame with raised mesh module + slats

• Cushions: 2× short side, 1× long back side, 1× 1 front side (removable)

• Hardware pack: stainless-steel bolts & proprietary fittings

• Single Allen key

• Pre-labeled (A/B/C/D) bed posts to match the instructions for easy assembly; quick-start guide included

Technical Specs

• Bed external dimensions: width: 130cm × length: 200cm

• Internal mattress size: 120 x 190cm – sold separately

• Mesh module height: 100cm

• Side cushions: height: 40cm, thickness: 10cm

• Half front cushion: length: 120cm, height: 40cm, thickness: 10cm

• GuardiNest slat base: width: 120cm, length: 190cm, thickness: 1.8cm

Materials:

• 100% solid white ash wood bed frame (smooth, splinter-free, odorless, chemical-free)

• 100% cotton cushion covers (cotton covers are undyed and unbleached; no optical brighteners)

• Premium 30-density foam cushion inserts with cotton terry lining

• 100% first-class solid pine slats

• Hardware: stainless-steel bolts and proprietary fittings for high-strength joints.

Assembly & Reuse

• Ships disassembled; frames assemble with a single Allen key (included).

• Proprietary bolt system: tight, quiet joints that reassemble cleanly—no wobble, no squeaks.

• Fully demountable (bolted, no adhesives); Disassemble and reassemble as needed with the included Allen key without deformation.

• Cushions attach tool-free via proprietary Velcro- type attachments.

• Wall-fixing recommended for anti-tip safety if cushions are removed.

Care & Safety

• Textiles (cushions/mesh): dry-clean only (prevents shrinkage; preserves fit). Remove foam inserts before cleaning.

• Wood: wipe with a soft, slightly damp cloth; dry immediately.

• All cushions sterilized with high-pressure steam and heat before packaging.

• Always supervise children under 2; for toddlers, transition gradually to partial cushion/mesh removal.

• Set up tips: Keep the hardware pack + Allen key together. Allen key use is recommended. Don’t over-tighten; snug all bolts, then re-check after the first few nights and whenever you move the bed.

Design & Compliance

• Manufactured with non-toxic, child-safe materials.

• Complies with EN71-3 safety standards.